ENTTEC PLink Injector 12V

£5.00 ex VAT per day


The ENTTEC PLink injector is designed to work with the Enttec Pixelator series of controllers and allows you to intelligently control a LED tape of almost any variety. The 12-24V version will work with a large variety of 12V pixel tape. Each PLink can control up to 340 RGB pixels (1020 individual channels) split over 2 DMX universe. An external 12-24V DC PSU (supplied separately on request) is connected and Cat5/6/7 cable is used to connect the PLink back to the Pixelator brain. The Pixelator brain then converts numerous lighting control protocols (Art-Net, sACN, ESP and more) so that the PLinks can control the pixel tape.


  • 12-24V version
  • 1020 channel control per PLink
  • 2 DMX universes per PLink
  • Requires Pixelator controller

Key Features:

  • Control Input: Cat5/6
  • Power Input: Terminals for external 12-24V DC PSU (Supplied separately on request)
  • Max Power: 120W at 12V, 240W at 24V
  • Dimensions: 84mm(w) x 84mm(d) x 34mm(h)

Further Details: